PRESTIGE Paints Exterior Paint and Primer In One, 1-Gallon, Flat, Comparable Match of Valspar* New Black*

Description

Prestige Paints 100% acrylic exterior latex paint and primer in one is designed for exterior surfaces such as wood, masonry, cement board, vinyl, aluminum, and factory-primed siding. (Note: Do not paint vinyl siding with a darker color than the original, as it may cause warping.) Surface preparation: Clean off dirt, grease, soap residue, and loose paint. Sand glossy areas. Prime bare wood with oil-based primer and masonry with latex primer. Application: Stir well and mix containers for uniform color. Apply using a high-quality brush, roller, or sprayer. Thin with water only if needed. Use when temperature is above 50°F (10°C). Average coverage is 400 sq. ft. per gallon. For best results, apply two coats after priming. Not for indoor use. Dry time: Dries in 1 to 2 hours; allow overnight before recoating. Low temperatures or high humidity may extend drying time. Cleanup: Use warm water and soap. A flat or matte finish provides a smooth look and hides surface flaws. Matte finishes usually need fewer coats and are easier to touch up. Prestige Paints matches colors using proprietary formulas and is not affiliated with any referenced brand. Color may vary based on surface, sheen, and lighting.